Bmc Firmware Update; Available Status - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
4.6

BMC Firmware Update

This server has BMC on each of PCI modules 0 and 1. With the procedure described below, both BMCs are
automatically updated.
4.6.1

Available status

BMC firmware update can be performed only on the secondary PCI module.
If the target module is primary, change it to secondary.
The table below shows the potential cases in which the BMC firmware can be updated.
Component
Firmware under BMC
36
Important Consult with your maintenance personnel before updating BMC firmware.
 Duplex
The status of component can be verified on screen of ft Server Utility.
Tips
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
4. Maintenance of the Server
Status of component