Pu Operation Mode - Mitsubishi Electric FR-E700 Instruction Manual

PU operation mode

5.2 PU operation mode
From where is the frequency command given?
● Operation at the frequency set in the frequency setting mode of the operation panel. (Refer
to section 5.2.1.)
● Operation using the digital dial as the volume. (Refer to section 5.2.2.)
● Change of frequency with ON/OFF switches connected to terminals. (Refer to section 5.2.3.)
● Frequency setting with a voltage output device. (Refer to section 5.2.4.)
● Frequency setting with a current output device. (Refer to section 5.2.5.)
Power
supply
5 - 20
Inverter
Motor
Fig. 5-11:
PU operation mode
Basic settings
I001897E