Mitsubishi Electric FR-E700 Instruction Manual page 98

Operation panel
Screen at powering on
The monitor display appears.
Press the PU/EXT key to choose the PU
operation mode.
Press the MODE key to choose the parameter
setting mode.
Turn the digital dial until "Pr.CH" appears.
Pressing the SET key changes to the initial value
change list screen.
Turning the sigital dial displays the parameter
number changed.
Press th SET key to read the currently set value.
Turn the digital dial and press the SET key to
change the setting.
Turn the digital dial to read another parameter.
The display returns to "P.---" after all parameters
are displayed.
Pressing the SET key in status "P.---" returns to the
parameter setting mode.
Turning the digital dial sets other parameters.
Pressing the SET key displays the change list again.
Fig. 4-14: Initial value change list
4 - 18
Operation
Operation
Display
PU indication is lit.
PRM indication is lit.
The parameter number
read previously
appears..
It may take several
seconds for creating
the initial value
change list. "P.--- "
flickers while creating
the list.
Flicker ... Parameter setting complete!
I001743E