PU operation mode
5.2
PU operation mode
Power
supply
From where is the frequency command given?
● Operation at the frequency set in the frequency setting mode of the operation panel. (Refer
to section 5.2.1.)
● Operation using the digital dial as the volume. (Refer to section 5.2.2.)
● Change of frequency with ON/OFF switches connected to terminals. (Refer to section 5.2.3.)
● Frequency setting with a voltage output device. (Refer to section 5.2.4.)
● Frequency setting with a current output device. (Refer to section 5.2.5.)
5 - 40
Inverter
Motor
Fig. 5-16:
PU operation mode
Basic settings
I001069E