Initial Value Change List - Mitsubishi Electric FR-E700 Instruction Manual

Operation
4.3.10

Initial value change list

Displays and sets the parameters changed from the initial value.
NOTES
Calibration parameters (C1 (Pr. 901) to C7 (Pr. 905)) are not displayed even they are
changed from the initial settings.
Only simple mode parameter is displayed when simple mode is set (Pr. 160 = 9999).
Only user group is displayed when user group is set (Pr. 160 = "1").
Pr. 160 is displayed independently of whether the setting value is changed or not.
When parameter setting is changed after creating the initial value change list, the setting will
be reflected to the initial value change list next time.
FR-E700 EC
Operation panel
4 - 17