Operation Selection At Power Failure; Automatic Restart (Pr. 30, Pr. 57, Pr. 58, Pr. 96, Pr. 162, Pr. 165, Pr. 298, Pr. 299, Pr. 611) - Mitsubishi Electric FR-E700 Instruction Manual

Parameter
6.12

Operation selection at power failure

Purpose
At instantaneous power failure
occurrence, restart inverter without
stopping motor.
When under voltage or a power fail-
ure occurs, the inverter can be
decelerated to a stop.
6.12.1 Automatic restart
(Pr. 30, Pr. 57, Pr. 58, Pr. 96, Pr. 162, Pr. 165, Pr. 298, Pr. 299, Pr. 611)
You can restart the inverter without stopping the motor in the following cases.
● when power comes back on after an instantaneous power failure
● when motor is coasting at start
FR-E700 EC
Parameters that must be set
Automatic restart operation after instanta-
neous power failure/flying start
Power failure-time deceleration-to-stop
function
Operation selection at power failure
Pr. 30, Pr. 57,
Pr. 58, Pr. Pr. 96,
Pr. 162, Pr. 165,
Pr. 298, Pr. 299,
Pr. 611
Pr. 261
Refer to
Section
6.12.1
6.12.2
6 - 151