Pu Connector; Connecting The Operation Panel Using A Connection Cable - Mitsubishi Electric FR-E700 Instruction Manual

Wiring
3.5

PU connector

Using the PU connector, you can perform communication operation from the FR-PU07, the
FR-PA07 or a personal computer. Refer to the figure below to open the PU connector cover.
PU connector
Fig. 3-14: To open the cover of the PU connector
3.5.1

Connecting the operation panel using a connection cable

Use the optional FR-CB
plugs securely into the PU connector of the inverter and the connection connector of the
FR-PU07/FR-PA07 along the guide until the tabs snap into place.
Overall wiring length when the parameter unit is connected: max. 20m.
Fig. 3-15: Connecting the parameter unit FR-PU07/FR-PA07 using a connection cable
FR-E700 EC
To open the cover
Place a flathead screwdriver, etc. in a slot
and push up the cover to open.
or connector and cable available on the market. Insert the cable
Cable FR-CB (option)
FR-PA07 FR-PU07
PU connector
PU connector
I001919E
II002059E
3 - 23