Parameter List With Instruction Codes - Mitsubishi Electric FR-E700 Instruction Manual

Appendix
A.4

Parameter list with instruction codes

In the initial setting status, simple mode parameters and extended parameters can be displayed.
Set Pr. 160 "User group read selection" as required. So check the setting of Pr. 160 if parameters
are not shown or change the setting of Pr. 160 to lock parameters.
Parameter Name
160
Tab. A-4: Settings of parameter 160
NOTES The parameters marked
The parameters marked with
ration even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
Parameters for the option are displayed only when the option unit is installed.
The instruction codes (hexadecimal) for "read" and "write" on the right of the parameter
number are those used to set the parameter via communication. "Extended" indicates the
setting of the extended link parameter. (Refer to section 6.19 for communication.)
The symbols in the table have the following meanings:
✔: Setting the parameter is possible for this operation mode.
—: Setting the parameter is impossible for this operation mode.
Instruction Code
Para-
Function
meter
0 00
1 01
2 02
3 03
4 04
Basic
functions
5 05
6 06
7 07
8 08
9 09
Tab. A-5: Parameter list with instruction codes (1)
FR-E700 EC
User group read
selection
are the simple mode parameters.
Name
80 0 Torque boost
81 0 Maximum frequency
82 0 Minimum frequency
83 0 Base frequency
84 0
85 0 Multi-speed setting
86 0
87 0 Acceleration time
88 0 Deceleration time
89 0 Electronic thermal O/L relay
Parameter list with instruction codes
Initial Setting
Remarks
Value Range
Only the simple mode parameters can be dis-
9999
played.
Simple mode and extended mode
0 0
parameters can be displayed.
Only parameters registered in the user group
1
can be displayed.
in the table allow its setting to be changed during ope-
Control Mode-based
Correspondence Table
General-
purpose
V/f control magnetic
flux vector
control
✔
✔
✔
✔
✔
RH
✔
RM
✔
RL
✔
✔
✔
Refer
Advanced
to Page
magnetic
flux vector
control
— — 6-33
✔ ✔
6-50
✔ ✔
— — 6-54
✔ ✔
✔ ✔
6-58
✔ ✔
✔ ✔
6-69
✔ ✔
✔ ✔
6-80
Customer
Setting
A - 11