Table of Contents
Advertisement
MAIN MENU
Main
Operator
Operator Menu
Setup Menu
Maintenance Menu
5050/5100 User's Manual
The Main menu is organized in a tree structure. The active level is
displayed on the upper left corner of the LCD display and selection
options available displayed sequentially one at a time, on the lower
right corner of the LCD display.
The Main menu presents only the allowable (not hidden) top level
selections, Operator menu, Setup menu, Maintenance menu and
Menu Control. Only those menus selected will be displayed (See
"Menu Control", for further information.) The following menus are
available from the Main menu level, if all menus are setup as
accessible:
▪
Operator menu
▪
Setup menu
▪
Maintenance menu
▪
Menu Control (See "Menu Control" on page 32 for procedures to
view this menu.)
The Operator menu is for the user to make certain selections.
Normally, the Operator menu involves loading paper, correcting
faults, and allows temporary changes to settings that have previously
been set in the Setup menu. For procedures to navigate the operator
menu, see Chapter 4. For a complete listing of menu selections, see
Operator Menu Map in Appendix I.
The Setup menu is used to setup the printer to the customer's
environment as necessary for day to day normal operations. The
Setup menu allows configuration settings in the printer to be
changed and saved. Some settings are selected, enabled or user set.
For procedures to navigate the setup menu, see Chapter 5. For a
complete listing of menu selections, see Setup Menu Map in
Appendix I.
The Maintenance menu is for the maintenance technician for tune-up
operations such as print actuator monitoring, and upgrade
procedures. The Maintenance menu contains selections for hardware
setup, such as checking and resetting of counters, etc. For
procedures on navigating the maintenance menu, see Chapter 6. For
a complete listing of menu selections, see Maintenance Menu Map in
Appendix I.
31
Chapter 3. Operating the Printer
Advertisement
Table of Contents
Troubleshooting
