Emulation Vfu; Display Lan - Genicom 5050 User Manual

Emulation VFU

Type Select
Emulation VFU

DISPLAY LAN

Set Up
Display Lang
Display Lang
English<
5050/5100 User's Manual
This option sets the Vertical Format for an emulation-dependent
vertical format unit (VFU.) The VFU option is for all emulations
except Proprinter and FX286e. See the Programmer's Manual for
additional information.
Use the following procedure to select the Emulation VFU option:
▪ While in Type Select menu, press the ◄ (left) or ► (right) menu
browse key until Emulation VFU is displayed in the lower right
corner of the LCD. Press Select to select Emulation VFU.
This menu selects the LCD language.
1. While in the Set Up menu, press the ◄ (left) or ► (right) menu
browse key until Display Lang is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Display Lang
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
language is displayed in the lower right corner of the LCD.
4. Press the Select key to enable or disable an option. The < symbol
will immediately follow the enabled option.
138
GEK-99044E