Coax Compat; Case; Loc Copy Ff - Genicom 5050 User Manual

IBM Format

Coax Compat

Coax Compat

Case

Coax Compat
Case
Case
Dual<
Coax Compat

LOC Copy FF

LOC Copy FF
Disable<
5050/5100 User's Manual
Coax Compat
This menu is used to configure the Coax Compat (Coax Compatibility)
settings.
1. While in the IBM Format menu, press the ◄ (left) or ► (right)
menu browse keys until Coax Compat is displayed in the lower
right corner of the LCD.
2. Press the ▼ (down) menu browse key. Coax Compatibility will be
displayed in the upper left corner of the LCD.
The following describes the options available.
Case
This option is valid for DSC/DSE (LU-3) modes only. SCS (LU-1) is
always dual case. It causes the printer to print in upper and lower
case when set to Dual, or in upper case only when set to Mono.
1. While in the Coax Compat menu option, press the ◄ (left) or ►
(right) menu browse keys until Case is displayed in the lower
right corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Case options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
LOC Copy FF
This enables/disables the LOC (Local) Copy FF (Form Feed) option. If
enabled, it causes the printer to execute a form feed after the print
buffer is completed in an operator-initiated local copy print job. The
printer ejects the page and is set to print at column 1, line 1 of the
next page. This option overrides FF End Buff to allow the printer to
maintain compatibility with application programs designed for earlier
printers.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until LOC Copy FF is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the LOC Copy FF
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
118
GEK-99044E