Cr At Mpp+1; Nl At Mpp+1 - Genicom 5050 User Manual

Coax Compat
CR at MPP +1

CR at MPP+1

NL<
Coax Compat

NL at MPP+1

NL at MPP+1
LN+2<
5050/5100 User's Manual
CR at MPP+1
This enables/disables a CR at MPP +1 (Carriage Return at Maximum
Print Position + 1). If CR at MPP+1 is set to NL and a carriage return
is executed at MPP+1, a new line will also be executed. The next print
position will be on the next line, column 1. If set to CR, and a
carriage return is executed at MPP+1, no additional new line will be
executed, and the next print position will be the current line,
column 1.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until CR at MPP+1 is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the CR at MPP+1
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
NL at MPP+1
This enables/disables a NL at MPP+1 (New Line at Maximum Print
Position + 1). If NL at MPP+1 is set to LN +2, a new line is executed at
MPP +1, and additional new line is executed automatically, the next
print position will be in column 1 and down 2 lines. If set to NL, no
additional new line is executed at MPP+1, and the next print position
will be on column 1 of the next line.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until NL at MPP+1 is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the NL at MPP+1
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
121
Chapter 5. Using the Setup Menu