Autowrap; Ff @ Tof - Genicom 5050 User Manual

Print Control

AutoWrap

AutoWrap
Enable<
Print Control

FF @ TOF

FF @ TOF
Enable<
5050/5100 User's Manual
AutoWrap
This menu is used to enable/disable the auto wrapping option for the
printer. If set to enable, autowrapping will occur at the right margin.
If this option is disabled, no auto wrap will occur and data will be
truncated.
1. While in the Print Control menu, press the ◄ (left) or ► (right)
menu browse keys until AutoWrap is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the AutoWrap
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
FF @ TOF
This menu is used to define form feed with top of form behavior for
the printer. If enabled, the printer will ignore a form feed character, if
the printer is already at the top of form.
1. While in the Print Control menu, press the ◄ (left) or ► (right)
menu browse keys until FF @ TOF is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the FF @ TOF
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
68
GEK-99044E