Selecting The Paper Path; 5050/5100 (55 And 60 Dba) Cabinet Model Only - Genicom 5050 User Manual

SELECTING THE PAPER PATH

5050/5100 (55 and 60 dBa) CABINET MODEL ONLY

This printer has a top exit paper path and a rear exit paper path.
The top path is used when forms or peel-off labels are printed from
the printer individually.
The rear path is used when high volume or unattended print jobs are
printed.
When the top is closed, the paper will automatically seek the rear
exit. To switch to the top exit, push down on the ears of the top exit
door as shown below. See "Path" on page 134 for selecting the paper
path in the LCD menu.
REAR PAPER PATH
Choose the paper path before allowing the paper to go past the
upper tractors. The top cover must be closed for the paper to use
either path.
5050/5100 User's Manual
TOP PAPER PATH
Figure 2-9 Top and Rear Paper Paths
5050/5100 (55 dBa) CABINET MODEL SHOWN
12
EARS OF THE TOP EXIT DOOR
Note
GEK-99044E