Dcf 2 - Genicom 5050 User Manual

IBM Format
DCF1
DCF1
00
IBM Format
DCF2
DCF2
00
5050/5100 User's Manual
1. While in the IBM Format menu, press the ◄ (left) or ► (right)
menu browse key until DCF1 is displayed in the lower right corner
of the LCD.
2. Press the Select key to configure the DCF1 option.
3. Notice the cursor (underline) is now shown under the first digit.
Use the horizontal ◄ ► (left or right) menu browse keys to
position the cursor (underline) under the digit to be changes; use
the vertical ▲ ▼ (up or down) menu browse keys to
increment/decrement the selected numeric digit by one.
4. Press the Clear key after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Note
Repeat this section if further changes are necessary.

DCF 2

This selects the DCF2 setting. See DCF 1 for additional information.
1. While in the IBM Format menu, press the ◄ (left) or ► (right)
menu browse key until DCF2 is displayed in the lower right corner
of the LCD.
2. Press the Select key to configure the DCF2 options.
3. Notice the cursor (underline) is now shown under the first digit.
Use the horizontal ◄ ► (left or right) menu browse keys to
position the cursor (underline) under the digit to be changes; use
the vertical ▲ ▼ (up or down) menu browse keys to
increment/decrement the selected numeric digit by one.
4. Press the Clear key after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Repeat this section if further changes are necessary.
Note
116
GEK-99044E