Default Ocr-B; Vertical Dpi; Slashed Zero - Genicom 5050 User Manual

IGP

Default OCR-B

Default OCR-B
Disable<
IGP

Vertical DPI

Vertical DPI
72<
IGP

Slashed Zero

Slashed Zero
Disable<
5050/5100 User's Manual
Default OCR-B
This selects the OCR-B setting for IGP. When enabled, the default
font will be OCR-B.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Default OCR-B is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Default OCR-B
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Vertical DPI
This selects the Vertical DPI setting for IGP. This is used to specify
the Vertical Dots Per Inch. If set to 70 (72), a one-inch (1") high
character will be 70 (72) of an inch high.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Vertical DPI is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Vertical DPI
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Slashed Zero
This selects the Slashed Zero setting for IGP. When enabled, zero
characters will print as slashed zeros, e.g.. "Ø."
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Slashed Zero is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Slashed Zero
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
96
GEK-99044E