Ff Before Lc; Interv Req - Genicom 5050 User Manual

Coax Compat

FF Before LC

FF Before LC
Disable<
Coax Compat

Interv Req

Interv Req
Enable<
5050/5100 User's Manual
FF Before LC
This enables/disables the FF (Form Feed) Before LC (Local Copy)
option. If enabled, it causes the printer to execute a form feed before
the printer buffer is completed in an operator-initiated local copy
print job.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF Before LC is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the FF Before LC
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Interv Req
This enables/disables the Interv Req (Intervention Required) option.
When enabled, it causes an intervention required message to be sent
to the host computer if the printer is busy or in an error condition.
The time before sending the Intervention Required message is set by
the Irq Err TO and Irq Bsy TO options.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until Interv Req is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the Interv Req
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
119
Chapter 5. Using the Setup Menu