Igp Terminator; Quiet Mode; Delete Logos - Genicom 5050 User Manual

IGP

IGP Terminator

IGP Terminator
CR LF<
IGP

Quiet Mode

Quiet Mode
Disable<
IGP

Delete Logos

Delete Logos
Disable<
5050/5100 User's Manual
IGP Terminator
This selects the IGP Terminator for IGP. When set to CR, all IGP
commands are required to be terminated with a carriage return.
When set to CR LF, all IGP commands are required to be terminated
with a carriage return and linefeed.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until IGP Terminator is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the IGP
Terminator options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Quiet Mode
This selects the Quiet Mode setting for IGP. When enabled, all IGP
commands are passed unprocessed to the printer (printed as text.)
Disabling this option, or receiving a LISTEN command, will disable
Quiet Mode.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Quiet Mode is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Quiet Mode
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Delete Logos
This selects the Delete Logos setting for IGP. When enabled, logos
that are associated with a form will be deleted when the form is
deleted. To conserve IGP memory, all forms and logos should be
deleted when they are no longer required.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Delete Logos is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Delete Logos
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
95
Chapter 5. Using the Setup Menu