Reset To Deflts - Genicom 5050 User Manual

RESET TO DEFLTS

Maintenance
Reset to Deflts
Reset to Deflts
USA
5050/5100 User's Manual
Reset the printer to factory defaults or re-initialize certain groups of
printer settings.
Before proceeding with resetting the printer, have a printout of
the printer's current settings. This will provide a record of
settings which may need to be restored after initializing. See the
"Show" option on page 42 (Chapter 4 Using the Operator Menu)
for additional information.
1. While in the Maintenance menu, press the ◄ (left) or ► (right)
menu browse key until Reset to Deflts is displayed in the lower
line of the LCD.
2. Press the ▼ (down) menu browse key to access the reset to
defaults options.
3. Press the ◄ (left) or ► (right) menu browse key to select either
USA or International.
4. Press the ▼ (down) menu browse key to access either USA or
International reset options.
5. Press the ◄ (left) or ► (right) menu browse key to select the type
of Reset to Deflts option desired.
The All Interfaces option will reset all interface settings to the
factory default settings. The All Formats option will reset all
previously saved formats to factory defaults. The All Emulations
option will reset all emulation settings to factory default
settings. The Total Init option will reset all interfaces, all formats,
and all emulations to factory default settings.
6. Press the Select key to reset the printer to factory defaults. The
printer momentarily displays STARTUP in the LCD and will
complete a power-up sequence. After completion of a power-up
sequence, printer returns to an Online status.
7. If the printer was operating before initialization, it may need to be
reconfigured for the specific task at hand. After achieving proper
configuration, print a set of status reports and save for future
reference.
Note
Note
140
GEK-99044E