Wire Paper Guide - Genicom 5050 User Manual

Wire Paper Guide

FIGURE 2 - 11a
5050/5100 User's Manual
The printer is shipped with a wire paper guide installed. The purpose
of this part is to prevent paper jams when the rear (default) paper exit
is used.
To thread paper through the rear exit, lift up the paper guide until it
sticks to the magnet on the top cover. See Figure 2-10.
Figure 2-10 Wire Paper Guide
5050/5100 (55 or 60 DbA) cabinet Model)
To have paper exit through the top (5050/5100 (55 or 60 dBa)
Cabinet Model only), the paper guide must be removed. Placing a
hand under the paper guide at the left end, lift up and away at an
angle. See Figure 2-11a. Placing a hand under the right side of
the paper guide, lift up and toward the front of the printer. See
Figures 2-11b and 2-11c.
FIGURE 2 - 11b
MAGNET
PAPER GUIDE
Note
13
FIGURE 2 - 11c
Chapter 2.Getting Started