Description Of The Control Panel - Genicom 5050 User Manual

DESCRIPTION OF THE CONTROL PANEL

5050/5100 User's Manual
The control panel is mounted in the top of the printer and is
accessible with the top cover either open or closed. The Control Panel
utilizes a display panel composed of two rows of sixteen characters
each. With the top cover open, the control panel will move around
slightly to the touch. This is normal. The floating mount allows the
panel to align itself when the top cover is closed.
The basic look and layout of the 5050/5100 control panel is
represented by the following:
The four keys to the right of the display are to navigate the menu tree
structure and are referred as menu browse keys. The On Line/Off Line
key is located at the top of the left row of keys. The three keys below
the On Line/Off Line key,↑ (up arrow), ↓ (down arrow), and TOF, are
used to set top of form. See "Setting Top of Form" in Chapter 3 for
additional information. The bottom left key, Format (in conjunction
with the Select key), is used to select one of ten stored formats. The
FF, Tear Off, and View keys under the display are additional paper
positioning functions. The Clear and Select keys are used in data
entry and menu operations.
In the online state, only the FF, On Line/Off Line, Tear Off, & View
keys and limited functionality of the Clear and Select keys are active.
Pressing any other key causes a "beep." The "Processing" LED
indicator is lit whenever data is being received and or being
processed/printed. In multi-source I/O mode, the "Processing" LED
indicator will blink for the duration of the timeout period when
processing is complete. The processing LED indicator lights should
be unlit before making menu changes.
The control panel mount on the 5050/5100 is hinged so that it
can be tilted forward to remove the ribbon deck for service.
Note
6
GEK-99044E