CHAPTER 2.
PREPARING THE PRINTER FOR OPERATION
BRAKE TAB
5050/5100 User's Manual
GETTING STARTED
Printer unpacking is complete when all accessories have been
removed from the packaging and printer cabinet or pedestal. See
Appendix A for instructions to unpack the printer from its packing
materials.
Move the printer to a suitable operating location. See Appendix C for
considerations on the space and conditions required for normal
operation.
The two front casters have locks to stabilize the printer once it has
been moved to its location. Press one brake tab to lock the wheel of
the caster and press the other tab to unlock. See Figure 2-1.
The printer should be initially setup following the instructions
given in this chapter, in the order presented.
PUSH DOWN
TO LOCK
Figure 2-1 Brake Tab on Front Caster
Note
3
Chapter 2.Getting Started