Menu Mode: Control Panel - Genicom 930 User Manual

Selecting the Character Pitch
Press
CHARACTER PITCH/RESET
characters in characters per inch, or Proportional:
CHARACTER PITCH
10
17
10 cpi
• Recommended for standard text
• Not available for SSD
12 cpi
• Recommended for standard text
• Yields more text per page
17.1 cpi, 20 cpi
• Recommended for spreadsheets
• Smallest print
• Not available for SSD
PROP
• Recommended for a more polished appearance.
• Proportional spacing
• NLQ and Utility only
E-26 Section 3
to select the width of
12 15
20 PROP

Menu Mode: Control Panel

In the Menu mode, you can use the front panel buttons to
change the defaults for the printer parameters. The changes
you make in the Menu mode are automatically saved when
you exit the Menu mode and are retained even if you turn
the printer off.
Ê
SEL
LF
SEL
Micro Feed
MENU SHIFT
Down
EXIT GROUP
POWER ALARM
Ê GROUP :
Prints the next Group in the Menu. With the
key, prints the previous Group.
SHIFT
Ë ITEM :
Prints next Item in the Group. With the
key, prints previous Item in the Group.
Ì SET :
Prints next Setting for an Item. With the
key, prints previous Setting for an Item.
Í PRINT :
Prints a copy of all the Menu settings. With
the key, prints the current settings for
SHIFT
the Group selected.
Î MENU light: Glows when the printer is in the Menu Mode.
Ì Í
Ë
FF/LOAD TEAR PARK QUIET
Micro Feed
TOF
Up
PRINT
ITEM SET
MENU
SHIFT
Î
SHIFT