Lcd Menu - Genicom 3870 User Manual

Format
1
Menu
Enter

LCD Menu

There are two menus in the printer: the LCD menu and the printed menu. The
language of the LCD messages can be changed by using the LCD menu.
The LCD menu includes the items that are changed most frequently. The LCD menu
is convenient when running preprinted forms to change a setting without using any
paper.
There are submenus under the main LCD menu selections. The features are located at
the last level of a submenu. At the feature level, a selection is displayed preceded by
the greater-than symbol ">", or the arrow. The arrow indicates that this is the current
selection. See "LCD Menu Map" in this chapter.
The automatic head gap offsets and the semiautomatic head gap settings are accessible
only from the LCD menu. See Chapter 7.
All other LCD menu selections in addition to many others are also available in the
printed menu. See Chapter 4. The printed menu allows the user to see a list choices
before selecting one, and to some extent provides a hard-copy record of what was
changed. The printed menu is accessed through the LCD menu.
To access the LCD
menu
To ON LINE light must
be out.
F o r m a t 4
Selects a format. Read "Formats", Chapter 6 before pressing this
key. This can inadvertently overwrite current parameters such as
margins, font, LPI, CPI, tabs, form length, and so forth. Functions as
the "decimal point" in menu entry mode.
When online, steps the LCD through current settings for font, CPI,
LPI, path, interface, and emulation. Offline, enters the LCD menu.
Functions as the "Enter" key in the menu mode.
If not, then press the ON LINE key.
The LCD should show the last format that was selected. The number
can be from 1 to 4.
Control Panel
3-3