Repacking - Genicom 5050 User Manual

Repacking

5050/5100 User's Manual
The printer is top heavy. Use two people for the next four steps.
10. Using two people, carefully slide the printer, in the shipping
package base, off the pallet. This is easiest done with one person
on one side of the printer and the other person on the opposite
side. Place a foot on the pallet to prevent it from moving, and slide
the printer forward off the pallet.
11. Cut the four corners of the shipping package base so that the
sides will lay flat. See Figure A-10.
FIGURE A-10
12. Tilt the printer up slightly on one side and kick the packing block
out from under the printer. Carefully lower the printer.
13. Tilt the printer up on the other side and remove the other packing
block.
14. Remove the plastic bag from the printer.
15. Roll the printer off the base of the shipping package.
If this product needs to be repackaged for shipment to another
location or for servicing, contact an authorized sales representative
for a field repacking kit.
Caution
172
STEP 11
GEK-99044E