Unpacking (5050/5100 55 or 60 dBa Model)
STEP 3 AND 4
5050/5100 User's Manual
17. Remove the two screws on the bottom of the shipping bracket.
The brackets and screws, as well as the Allen wrench can be
reused if the printer is shipped to a new location at a future
date.
1. Cut the shipping straps. See Figure A-6.
2. Lift the top off the shipping package. See Figure A-6.
STEP 1
3. Remove any items stored inside the shipping package. See Figure
A-7
4. Remove the tray. See Figure A-7.
5. Remove the two pieces of packing material from the top of the
printer. See Figure A-7.
6. Lift out the front wall of the shipping sleeve. See Figure A-7.
FIGURE A-7
Note
FIGURE A-6
STEP 5
170
STEP 2
STEP 6
GEK-99044E