Ipds Bc Density; Ipds Gr Density; Ipds Im Density - Genicom 5050 User Manual

IPDS

IPDS BC Density

IPDS BC Density
Low<
IPDS

IPDS GR Density

IPDS GR Density
Low<
IPDS
IPDS Image Density
IPDS Image Density
Low<
5050/5100 User's Manual
IPDS BC Density
This selects the IPDS BC (Barcode) Density setting for IPDS. Low is
72 dots horizontally by 72 dots vertically and High is 144 dots
horizontally by 144 vertically.
1. While in the IPDS menu, press the ◄ (left) or ► (right) menu
browse key until IPDS BC Density is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the IPDS BC
Density options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
At Low density, some barcode styles may not be readable.
IPDS GR Density
This selects the IPDS GR (Graphics) Density setting for IPDS. Low is
72 dots per inch and High is 144 dots per inch. Higher density means
better print quality, but at a lower speed.
1. While in the IPDS menu, press the ◄ (left) or ► (right) menu
browse key until IPDS GR Density is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the IPDS GR
Density options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.

IPDS Im Density

This selects the IPDS Im (Image) Density setting for IPDS. Low is 72
dots per inch and High is 144 dots per inch. Higher density means
better print quality, but at a lower speed.
1. While in the IPDS menu, press the ◄ (left) or ► (right) menu
browse key until IPDS Image Density is displayed in the lower
right corner of the LCD.
2. Press the ▼ (down) menu browse key to access the IPDS Image
Density options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Note
106
GEK-99044E