Print Control; Define Lf; Define Cr - Genicom 5050 User Manual

Set Up

Print Control

Define LF

LF = CR + LF<
Print Control

Define CR

Define CR
CR = CR <
5050/5100 User's Manual
Print Control
This menu and its sub-menus are used to set printer response to line
termination and certain positioning commands sent by the host
system.
1. While in the Set Up menu, press the ◄ (left) or ► (right) menu
browse key until Print Control is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Print Control
sub-menus.
The following describes the sub-menus and options available:
Define LF
This menu is used to define the action of the printer upon receiving a
line feed character.
1. While in the Print Control menu, press the ◄ (left) or ► (right)
menu browse keys until Define LF is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Define LF
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Define CR
This menu is used to define the action of the printer upon receiving a
carriage return character.
1. While in the Print Control menu, press the ◄ (left) or ► (right)
menu browse keys until Define CR is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Define CR
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
66
GEK-99044E