Setting Top Of Form - Genicom 5050 User Manual

SETTING TOP OF FORM

5050/5100 User's Manual
Setting the top of form tells the printer where the top of form position
(perforation) is located on the paper.
Use the following procedures to set the top of form.
1. The paper perforation must first be positioned at the pointer on
each of the upper tractor doors. See Figure 3-1.
2. Position the paper using the
3. After the perforation is positioned at the pointers press the TOF
key, the printer will move the paper so that the paper is correctly
positioned at the print wires for printing. Press the On Line key to
place the printer online.
To ensure proper printing integrity, do not print within 1/8 inch
of perforations.
FIGURE 3-1 PAPER PERFORATION CORRECTLY
POSITIONED BETWEEN UPPER TRACTORS
↑
key and/or
Note
PAPER PERFORATION
36
↓
keys.
GEK-99044E