QMS
Magnum Spaces
Version
Disable<
QMS
Ignore Chr Mode
Ignore Chr Mode
Disable<
5050/5100 User's Manual
Magnum Spaces
This selects Magnum Spaces for QMS. When Magnum Spaces is
enabled, trailing spaces in strings are ignored. If a Magnum pass field
contains only spaces, the defined height of the field is ignored.
1. While in the QMS menu, press the ◄ (left) or ► (right) menu
browse key until Magnum Spaces is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Magnum
Spaces options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Ignore Chr Mode
This menu selects the Ignore Character Mode setting for QMS. When
Ignore Chr Mode is enabled, the character value specified in Ignore
Char option will be discarded when detected in the datastream. If this
option is enabled, a character must be designated to be discarded
using the Ignore Char (see next option.)
1. While in the QMS menu, press the ◄ (left) or ► (right) menu
browse key until Ignore Chr Mode is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Ignore Chr
Mode options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
104
GEK-99044E