Changing Menu Access Options; Menu Access Option And Values; Exiting And Saving - Genicom LA36 User Manual

Using Set-Up Mode

Changing Menu Access Options

You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-
Up options.

MENU ACCESS Option and Values

• Overprinted values are the factory settings.
MENU ACCESS
Option
<MENU-ACCES>

Exiting and Saving

This section describes how to exit the Set-Up mode while saving any changes you have
made.
To exit the Set-Up mode with the settings saved, first select the SAVE&EXIT function and
then press the
Any settings changed while in the Set-Up mode are saved as the new power-on defaults for
the printer. The new defaults remain active until you change them again.
4-30
Values
Specify the type of access to the Set-Up functions
from the control panel or from the <FUNCTIONS>
menu.
All functions are accessible.
ALL FUNC
MACRO ONLY Only MACRO 1 and MACRO 2 functions are
accessible from the <FUNCTIONS> menu.
Set-Up mode is inaccessible.
NO ACCESS
NO PANEL Font
Normal mode. Set-Up mode is also inaccessible.
Note:
You can return to the All Functions Accessible
mode by turning the printer on while pressing the
Park, LF,
The printer enters the Set-Up mode with this
operation.
button or the button.
Description
, , and buttons are disabled even in
Macro Protocol
and buttons at the same time.
FF/Load