Control Chars; Language - Genicom 5050 User Manual

QMS

Control Chars

Control Chars
5E<
QMS

Language

Language
English (USA)<
5050/5100 User's Manual
Control Chars
The values that are selected in the menus are ASCII hexadecimals.
These are the DSC (DataSteam Compatibility) values based on the
IBM EBCDIC code pages that are being used. The default is 0X5E
(cirumflex).
1. While in the QMS menu, press the ◄ (left) or ► (right) menu
browse key until Control Chars is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Control Chars
options.
Language
This menu option selects the Language for QMS. This permits the
selection of one of twelve International Standards Organization (ISO)
character sets as the default character set.
1. While in the QMS menu, press the ◄ (left) or ► (right) menu
browse key until Language is displayed in the lower right corner
of the LCD.
2. Press the ▼ (down) menu browse key to access the Language
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
100
GEK-99044E