Ff Data; Ff Endbuff - Genicom 5050 User Manual

Coax Compat

FF Data

FF Data
Col 1<
Coax Compat

FF EndBuff

FF EndBuff
LN 1<
5050/5100 User's Manual
FF Data
This enables/disables FF Data (Form Feed Followed by Data). The FF
Data option is used to select the action taken if a form feed is
received by the printer and it is not the last character in the IBM
print buffer. When set to COL 2, the current print position after the
form feed will be the second column on line one of the next form. If
set to COL 1, the current print position will be the first column on
line one of the next form.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF Data is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF Data
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
FF EndBuff
The FF End Buff option is used to select the action taken if a form
feed is received by the printer and it is the last character in the IBM
print buffer. When set to LN 2, the current print position after the
form feed will be the first column on line two of the next form. If set
to LN 1, the current print position will be the first column on line one
of the next form.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF EndBuff is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF EndBuff
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
122
GEK-99044E