Coax Compat
Null Sup
Null Sup
LC/NSCS<
Coax Compat
FF Pos
FF Pos
CPP=1<
Coax Comp
Auto Funct
Auto Funct
NL<
5050/5100 User's Manual
Null Sup
If Null Sup (Null Suppression) is enabled and formatted data is
received from the host (ignore NL, EM, CR and print spaces instead),
then all lines consisting entirely of nonprintable characters (nulls,
attributes, and non-display or non-print fields) will be printed as
blank lines and a new line executed at the end of the line. The print
position after such a line will be on the next line, column one.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until Null Sup is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the Null Sup
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
FF Pos
This enables/disables FF Pos (Form Feed Position). Form feed
commands may be executed anywhere or treated as blanks if they do
not occur at MPP+1, the first print position of a line (column one).
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until FF Pos is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the FF Pos
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Auto Funct
The Auto Funct option is used to specify what action will be taken
when the printing of an IBM print buffer is completed. If set to FF
(form feed), the printer will automatically execute a form feed at the
end of the print buffer or a local copy, unless the last character
received was a form feed. If set to NL (new line), and the last
character received is not a form feed, new line, or carriage return, a
new line will be automatically executed.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until Auto Funct is displayed in the lower right
corner of the display.
2. Press the ▼ (down) menu browse key to access the Auto Funct
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
123
Chapter 5. Using the Setup Menu