Clip Text; Ignore Chr Mode - Genicom 5050 User Manual

IGP

Clip Text

Clip Text
Disable<
IGP

Ignore Chr Mode

Ignore Chr Mode
Disable<
5050/5100 User's Manual
Clip Text
This selects the Clip Text (Excess Text Ignored) setting for IGP. When
enabled, any text that exceeds the IGP form length will not be
printed.
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Clip Text is displayed in the lower right corner of
the LCD.
2. Press the ▼ (down) menu browse key to access the Clip Text
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Ignore Chr Mode
This menu selects the Ignore Character Mode setting for IGP. When
Ignore Chr Mode is enabled, the character value specified in Ignore
Char option will be discarded when detected in the datastream. If this
option is enabled, a character must be designated to be discarded
using an Ignore Char (see next option.)
1. While in the IGP menu, press the ◄ (left) or ► (right) menu
browse key until Ignore Chr Mode is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the Ignore Chr
Mode options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
97
Chapter 5. Using the Setup Menu