Last Lf/Ff; Supp Ccode; Vcs - Genicom 5050 User Manual

Coax Compat

LAST LF/FF

LAST LF/FF
Enable<
Coax Compat

Supp CCode

Supp CCode
Disable<
Coax Compat

VCS

VCS
3268/4214<
5050/5100 User's Manual
LAST LF/FF
This enables/disables LAST LF/FF (Last Line Feed Send as Form
Feed). When enabled, this option will cause a form feed when the last
character in the IBM print buffer is a line feed.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until LAST LF/FF is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the LAST LF/FF
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
Supp CCode
This enables/disables Supp CCode (Suppress Host Control Codes).
When enabled, suppresses control codes generated by the IBM host.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until Supp CCode is displayed in the lower
right corner of the display.
2. Press the ▼ (down) menu browse key to access the Supp CCode
options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
VCS
This selects a VCS option. Allows emulating Vertical Channel Select
commands executing emulation of a 3287 or a 3268/4214 printer.
1. While in the Coax Compat menu, press the ◄ (left) or ► (right)
menu browse keys until VCS is displayed in the lower right corner
of the display.
2. Press the ▼ (down) menu browse key to access the VCS options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
option is displayed. Press the Select key to enable or disable an
option. The < symbol will immediately follow an enabled option.
124
GEK-99044E