Vertexp Options - Genicom 5050 User Manual

Modify Format

VertExp Options

VertExp Options
Default (top)<
5050/5100 User's Manual
VertExp Options
This menu is used to control how the expanded characters will
appear. (See Set Up Menu Map in Appendix I for available selections.)
Although all expanded characters are printed from the top down, the
positioning on the page will make them appear to "group" up or "sag"
down when compared to normally printed characters on the same
line. See examples below.
BASELINE
DEFAULT
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until VertExp Options is displayed in the lower right
corner of the LCD.
2. Press the ▼ (down) menu browse key to access the VertExp
Options options. VertExp Options will now be displayed in the
upper left corner of the LCD.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
selection is displayed.
4. Press the Select key to select a VertExp Options option. The <
symbol will now immediately follow the saved VertExp Options
option.
63
"
GROUP" UP
"SAG"
Chapter 5. Using the Setup Menu