Cpi; Lpi - Genicom 5050 User Manual

Modify Format

CPI

CPI
10<
Modify Format

LPI

LPI
6<
5050/5100 User's Manual
CPI
This menu option is used to select the characters per inch (CPI.) (See
Set Up Menu Map for available selections.)
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until CPI is displayed in the lower right corner of the
LCD.
2. Press the ▼ (down) menu browse key to access the CPI options.
3. Press the ◄ (left) or ► (right) menu browse key until the desired
CPI setting is displayed in the lower right corner of the LCD.
4. Press the Select key to select the CPI option. The < symbol will
now immediately follow the saved CPI option. To configure a
unique CPI setting, select User Set. Notice the cursor (underline)
is now shown under the first digit. The four menu browse keys
revert to data entry operation. The horizontal ◄ ► (left or right)
keys position the cursor (underline) to the digit to be changed; the
vertical ▲ ▼ (up or down) keys increment/decrement the selected
digit by one.
5. Press the Clear key after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Pressing the Clear key does not erase the values entered, but does
allow the user to exit the User Set menu.
LPI
This menu is used to select the lines per inch (LPI) (See Set Up Menu
Map for available selections.)
1. While in Modify Format menu, press the ◄ (left) or ► (right) menu
browse keys until LPI is displayed in the lower right corner of the
LCD.
2. Press the ▼ (down) menu browse key to access the LPI options.
3. Press the ◄ (left) or ► (right) menu browse key, until the desired
LPI setting is displayed in the LCD.
4.
Press the Select key to select the LPI option. The < symbol will
now immediately follow the saved LPI option. To configure a
unique CPI setting, select User Set. Notice the cursor (underline)
is now shown under the first digit. The four menu browse keys
revert to data entry operation. The horizontal ◄ ► (left or right)
keys position the cursor (underline) to the digit to be changed; the
vertical ▲ ▼ (up or down) keys increment/decrement the selected
digit by one.
5.
Press the Clear key after all changes are complete and the
desired value is displayed in the lower right corner of the LCD.
Pressing the Clear key does not erase the values entered, but does
allow the user to exit the User Set menu.
55
Chapter 5. Using the Setup Menu