Miscellaneous Non-Fault Messages - Genicom 5050 User Manual

Miscellaneous Non-Fault Messages

DISPLAY
Ready
Standby
Mode
Tearoff
TopTearoff
5050/5100 User's Manual
Either Online or Offline will be displayed in upper left corner of the
display window. The following fault messages are displayed in the
lower right corner of the display window:
Table 7-2
Miscellaneous Non-Fault Messages
MEANING
Ready is the normal display when no faults exist.
Printer deselected by host (DC3 received from the
Serial Interface).
Paper is in position for tear off at rear paper exit.
Paper is in position for tear off at top paper exit.
See "Tearoff" in Chaper 3 for additional
information.
155
Chapter 7. Operator Care and Maintenance