Removing The Defective Ultraslim Odd - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2550 M4:
Table of Contents

Advertisement

"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
I
Removing the front cover is not required in order to replace the
ultraslim ODD in the 4x 3.5-inch HDD extension box.
"Removing the system air duct" on page 67
Ê
Ê If applicable,
"Removing the riser module" on page 84
Ê If applicable, remove the expansion card, see section
expansion card" on page
Ê Remove the fan bridge, see section
Ê If applicable,
"Removing the 4x 3.5-inch HDD extension box" on page 255

12.5.3.2 Removing the defective ultraslim ODD

Ê Remove the 4x 3.5-inch HDD extension box, see section
3.5-inch HDD extension box" on page
Ê Remove the ultraslim ODD, see section
the extension box" on page
12.5.3.3 Installing the new ultraslim ODD
Ê Install the ultraslim ODD, see section
HDD extension box" on page
Ê Install the 4x 3.5-inch HDD extension box, see section
inch HDD extension box" on page
12.5.3.4 Concluding steps
Ê If applicable, install the expansion card, see section
card" on page
Ê Install the fan bridge, see section
Ê If applicable,
"Installing the riser module" on page 85
"Installing the system air duct" on page 68
Ê
"Reassembling" on page 68
Ê
TX2550 M4
318.
394.
390.
312.
Upgrade and Maintenance Manual
"Handling fan bridges" on page
255.
"Removing the ultraslim ODD from
"Installing the ultraslim ODD into the
251.
"Handling fan bridges" on page 90
Accessible drives
"Removing an
90.
"Removing the 4x
"Installing the 4x 3.5-
"Installing an expansion
397

Advertisement

Table of Contents
loading

Table of Contents