Removing Processor Heat Sinks; Removing The Processor Heat Sinks - Fujitsu PRIMERGY CX2550 M2 Upgrade And Maintenance Manual

Processors
8.2.2

Removing processor heat sinks

I
If liquid cooling is installed, see section
on page 189.
8.2.2.1

Removing the processor heat sinks

Figure 39: Removing the processor heat sink
Ê Carefully press on the middle of the heat sink and loosen the four captive
screws in a crossover pattern according to the numbering.
Ê Carefully turn the heat sink back and forth to detach it from the processor.
I
This may be necessary due to the adhesive quality of the thermal
paste located between the heat sink and processor.
V
CAUTION!
Pay special attention not to damage any system board components
surrounding the processor socket.
Ê Lift the heat sink out of the chassis.
Ê Thoroughly clean residual thermal paste from the surface of the heat sink
and the processor using a lint-free cloth.
132 Upgrade and Maintenance Manual
"Removing the liquid cooling kit"
CX2550 M2