Configuring The Sas/Sata Raid Controller - Fujitsu PRIMERGY RX2530 M4 Operating Manual

Starting up and operation
6.4.2

Configuring the SAS/SATA RAID controller

The server can be populated optional with SAS/SATA RAID PCIe controller with
"MegaRAID functionality". You can configure the SAS/SATA RAID controller
either before or during installation with the ServerView Installation Manager.
Using the ServerView Installation Manager is recommended.
I
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User's
Guide" (on the Fujitsu manuals server under x86 Servers - Expansion Cards
- Storage Adapters - LSI Configuration Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under x86 Servers - Expansion Cards - Storage Adapters - LSI SAS /
SCSI RAID Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme under:
http://www.fujitsu.com/global/services/computing/server/ia/driver/index.html
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
76 Operating Manual
RX2530 M4