10.5
Replacing memory modules
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screwdriver (for cover)
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Extending the server out of the rack" on page
▶
"Removing the server from the rack" on page
▶
"Removing the cover 2" on page
▶
"Removing the air duct" on page
▶
"Removing the riser module" on page
▶
"Locating the defective component" on page
Removing the defective memory module
▶ Remove the memory module, see
page
174.
GX2560 M7
38.
47.
58.
62.
"Removing a memory module" on
Upgrade and Maintenance Manual
Hardware: 20 minutes
37.
38.
39.
39.
41.
37.
Main memory
175