Debug Platform Supervisor-Asic - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug platform supervisor-asic

Use the debug platform supervisor-asic privileged EXEC command to enable debugging of the
supervisor application-specific integrated circuit (ASIC). Use the no form of this command to disable
debugging.
Syntax Description all
errors
receive
send
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
The undebug platform supervisor-asic command is the same as the no debug platform
supervisor-asic command.
Related Commands Command
show debugging
OL-8604-03
debug platform supervisor-asic {all | errors | receive | send}
no debug platform supervisor-asic {all | errors | receive | send}
Display all supervisor-ASIC event debug messages.
Display the supervisor-ASIC error debug messages.
Display the supervisor-ASIC receive debug messages.
Display the supervisor-ASIC send debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
debug platform supervisor-asic
Catalyst 2960 Switch Command Reference
B-53