Debug Eap - Cisco IE-3000-8TC Command Reference Manual

debug eap

debug eap
Use the debug eap privileged EXEC command to enable debugging of the Extensible Authentication
Protocol (EAP) activity. Use the no form of this command to disable debugging.
Syntax Description
all
authenticator
errors
events
md5
packets
peer
sm
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command.
Related Commands Command
show debugging
show eap
Cisco IE 3000 Switch Command Reference
B-10
debug dot1x {all | authenticator | errors | events | md5 | packets | peer | sm}
no debug dot1x {all | authenticator | errors | events | md5 | packets | peer | sm}
Display all EAP debug messages.
Display authenticator debug messages.
Display EAP error debug messages.
Display EAP event debug messages.
Display EAP-MD5 debug messages.
Display EAP packet debug messages.
Display EAP peer debug messages.
Display EAP state-machine related-events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays EAP registration and session information for the switch or for the
specified port.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01