Flash_Init - Cisco catalyst 3750 Command Reference Manual

Appendix A Catalyst 3750 Switch Bootloader Commands

flash_init

Use the flash_init bootloader command to initialize the flash file system.
Syntax Description
This command has no arguments or keywords.
Defaults
The flash file system is automatically initialized during normal system operation.
Command Modes Bootloader
Command History Release
12.1(11)AX
Usage Guidelines
During the normal bootup process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
OL-8552-07
flash_init
Modification
This command was introduced.
Catalyst 3750 Switch Command Reference
flash_init
A-9