Flash_Init - Cisco Catalyst 3550 Command Reference Manual

flash_init

flash_init
Use the flash_init boot loader command to initialize the Flash file system.
Syntax Description
This command has no arguments or keywords.
Defaults
The Flash file system is automatically initialized during normal system operation.
Command Modes
Boot loader
Command History Release
12.1(4)EA1
Usage Guidelines During the normal boot process, the Flash file system is automatically initialized.
Use this command to manually initialize the Flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Catalyst 3550 Multilayer Switch Command Reference
A-8
flash_init
Modification
This command was first introduced.
Appendix A Boot Loader Commands
78-11195-09