Show Mvr Interface - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later
Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

show mvr interface

show mvr interface
Use the show mvr interface privileged EXEC command without keywords to display the Multicast
VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR
parameters for a specific receiver port.
Syntax Description
interface-id
members
vlan vlan-id
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
If the entered port identification is a non-MVR port or a source port, the command returns an error
message. For receiver ports, it displays the port type, per port status, and Immediate-Leave setting.
If you enter the members keyword, all MVR group members on the interface appear. If you enter a
VLAN ID, all MVR group members in the VLAN appear.
Examples
This is an example of output from the show mvr interface command:
Switch# show mvr interface
Port
----
Gi1/0/1
Gi1/0/2
In the preceding display, Status is defined as follows:
This is an example of output from the show mvr interface command for a specified port:
Switch# show mvr interface gigabitethernet1/0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
Catalyst 3750-X and 3560-X Switch Command Reference
2-772
show mvr interface [interface-id [members [vlan vlan-id]]]
(Optional) Display MVR type, status, and Immediate Leave setting for the
interface.
Valid interfaces include physical ports (including type, stack member
(stacking-capable switches only) module, and port number).
(Optional) Display all MVR groups to which the specified interface belongs.
(Optional) Display all MVR group members on this VLAN. The range is 1
to 4094.
Modification
This command was introduced.
Type
----
SOURCE
RECEIVER
Active means the port is part of a VLAN.
Up/Down means that the port is forwarding/nonforwarding.
Inactive means that the port is not yet part of any VLAN.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Status
Immediate Leave
-------
---------------
ACTIVE/UP
DISABLED
ACTIVE/DOWN
DISABLED
OL-29704-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-x

Table of Contents