Installing The Cmos Battery - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

14.1.4 Installing the CMOS battery

Figure 513: Installing the CMOS battery
Ê At a slight angle, fit the new CMOS battery into its socket as shown (1).
V
CAUTION!
Ensure to insert the CMOS battery with the positive pole (label side)
facing up as shown (see close-up).
Ê Fold down the CMOS battery (2) until it locks in place.
Ê Ensure that the locking spring (3) is properly engaged.
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
System board and components
769