Removing The Rdx Backup Drive - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

▶ Push the RDX backup drive somewhat to the front side to get more space.
▶ Connect the power cable to the RDX backup drive (1).
▶ Connect the USB 3.0 cable to the RDX backup drive (2).
▶ Push the RDX backup drive to the rear side until it snaps into place.
Concluding steps
▶
"Installing the top HDD cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Installing the bay cover" on page
▶
"Locking the server" on page
▶
"Reconfiguring the backup software solution" on page
▶
"Resuming BitLocker functionality" on page
12.4.2

Removing the RDX backup drive

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for removing the PSU)
CAUTION
▶
Always replace drives to comply with applicable EMC regulations
and satisfy cooling requirements.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Removing backup and optical disk media" on page
▶
"Verifying and configuring the backup software solution" on page
TX1310 M5
52.
50.
56.
57.
58.
59.
Upgrade and Maintenance Manual
Accessible drives
64.
68.
Hardware: 10 minutes
61.
63.
63.
169